Relay module with forced-guided contacts according to EN 50205 for safety circuits. The control is via DC 110 V. There are 2 openers and 4 contact contacts 250 V / 6 A are available for switching small to medium loads

• Rated voltage U_N : DC 110 V
• Voltage rangeDC 77 V - 137.5 V
• Rated current (for UN)12 mA
• Status indicator LEDLED yellow
• Protective circuit input side
• Freewheeling diode
• Reverse polarity diode
• Switching voltageAC/DC 5 V - 250 V
• Switching currentAC/DC 0.005 A - 6 A
• Switching power1500 VA / (50 W x DC 24 V)
• Contact materialAgCuNi + 0.2 microns Au

General data

• Connection type
• Push
• Single-wire 0.20 - 2.5 mm²
• AWG 20 - AWG 14
• Hostile 0.20 - 2.5 mm²
• AWG 20 - AWG 14
• Stripping length: 8 mm
• Screwdriver: 3.5 x 0.6 mm
• Installation position/type of installationAny : Any
• Short-circuit resistance : 1000 A, SCPD 6 A Functional class gG (pre-fuse)
• Rated insulation voltage
• AC/DC 300 V between control and load side
• AC/DC 300 V between coil and control contacts
• Degree : PD2
• Surge category : OV2
• Contact type : 2 opener, 4 normally open (forced-guided, according to EN 50205 application type A)
• Mech. Life : approx. 10 x 106 switching cycles
• Housing material : PC ABS
• Working temperature range : -40 °C ... +70 °C (+85 °C 10 min)
• Storage temperature range : -40°C... 85°C
• Dimensions (B-H-T) : 22.5x79x84mm
• Weight : 0.089 kg/pc
• Design : Microcompact
• Assembly : snaptable on hat rail TS35 (EN 60715)
• Protection : IP20

Device	Railway
Type	Railway | 110VDC