Product Details
Analog/Digital Training System
Analog/Digital Training System
Overview
The ETS-7000B Digital-Analog Training System is designed for the beginners to enhance the comprehension of digital and analog theory.
The design of Digital-Analog Training System is easy to operate and easy to understand.
Specifications
- Solderless breadboard : AD-222
- Interconnected with 2712 tie points nickel plated contact, fits
all components with DIP sizes and solid wire AWG #22-30
(0.3mm 0.8mm). It can be changed and replaced for different
purposes and can be connected with demonstration panel. - Therefore, it is very convenient for both teachers and students.
- Interconnected with 2712 tie points nickel plated contact, fits
- DC power supply :
- Fixed DC output : +5V ±10%, 1A.
- Fixed DC output : -5V ±10%, 300mA.
- Variable DC output : 0V ~ +15V ±10%, 500mA.
- Variable DC output : 0V ~ -15V ±10%, 500mA.
- Potentiometers :
- Variable resistor VR1 = 1 KΩ (B)
- Variable resistor VR2 = 100KΩ (B)
- Function generator
- Frequency ranges : 0.1 Hz ~ 2 Hz
- (6 ranges) 1 Hz ~ 20 Hz
- 10 Hz ~ 200 Hz
- 100 Hz ~ 2 KHz
- 1 KHz ~ 20 KHz
- 10 KHz ~ 200 KHz
- Amplitude output
- Sine wave : 0.1Hz ~ 200KHz, 20Vpp(Max.) ~ 10Vpp(Max.)
±10% variable. - Triangle wave : 0.1Hz ~ 200KHz, 20Vpp(Max.) ~ 6Vpp(Max.)
±10% variable. - Square wave : 0.1Hz ~ 200KHz, 20Vpp(Max.) ±10% variable.
- TTL mode : +5V ±10%
- Sine wave : 0.1Hz ~ 200KHz, 20Vpp(Max.) ~ 10Vpp(Max.)
- Frequency ranges : 0.1 Hz ~ 2 Hz
- Universal counter :
- Frequency range : 1Hz ~ 99.999999 MHz ; 10Hz ~ 100.00000MHz
- Period range TH & TL : 0.01μs ~ 999999.99μs ;
- 1μs ~ 99999999μs
- Input signal : TTL or CMOS level or any level (Vmin ≥ +2.3Vp ±10%)
- Display : 8-digit 7-segment LED display
- Counter switch : External / internal
- 16-bit data switch :
- When toggle switch is set at "down" position, the output is LO level; on the contrary, it will be HI level while setting at "up" position.
- Speaker : 2¼ inch diameter, 8Ω / 0.5W to be used for load
- Four channel adaptor : Both the two banana sockets' and two BNC jacks' point tips are
changeable. They are suitable to connect ETS-7000B with peripherals. - Two digits of segment LED display : ~
- BCD based o
- Numerical designs and resultant displays
- Two pulse switch (with 2 sets of output: A, , B, ) :
- 2 pcs of push-buttons contain switches Debounce for eliminating
the bounce caused by switch from "open" to "close" or from
"close" to "open" position. - 16-bit LED display :
- 16 red LEDs separate input terminals, light up at "HI level"
input, and turn off at "LO level" input. - USB Interface : Type A USB socket with external tie points (+5V,D-,D+,GND)
- Universal connector fixed holder : Reserving universal connector fixed holder on the panel to
connect with various universal connectors : - Standard accessory : UC-06 Centronic connector
- UC-01 : Card edge connector 2.54mm 62pin
- UC-02 : RS-232 connector 25pin D sub connector, male & female
- UC-03 : Straight header 60pin
- UC-04 : Card edge connector 3.96 mm 56pin
- 14. Other standard accessories :
- Power cord (3) User manual
- Pin : 15pcs (4) USB Cable (Type A to Type B)
- Dimensions : 360mm(W) x 340mm(D) x 101mm(H)
- Weight : 3kg
- A B connector
Downloads
Additional Information
| Device | Training System |
| Type | Analog/Digital |
