MGB LH Evaluation Module and Bus Module MGB-L2...-PN (Guard Locking by Solenoid Force) with 4 Control Elements, Push-Pull Plug

Evaluation Module and Bus Module

Feature(s)

Electrical connection values

Connecting cable
Ethernet	Profinet I/O cable, at least cat. 5e
Rated insulation voltage U_i	75 V
Rated impulse voltage U_imp	0.5 kV
EMC protection requirements	In accordance with EN 61000-4 and EN 61326-3-1
maximum feed-in current in the connection block
X1, X2	max. 4000 mA
Safety class	III
Current consumption	max. 600 mA
Transponder coding	Multicode
Degree of contamination (external, according to EN 60947-1)	3
	Power supply X1
Fuse
external	min. 1 A slow blow
Operating voltage DC
L1	24 V DC -15% ... +10%
Auxiliary voltage DC
L2	24 V DC -15% ... +10%
	Power supply X2
Operating voltage DC
L1	24 V DC -15% ... +10%
Auxiliary voltage DC
L2	24 V DC -15% ... +10%

Mechanical values and environment

Connection type
	Push-pull power
for enabling switch	Plug connector RC12
according to IEC 61076-3-117, variant 14, screened, Profinet I/O cable, at least cat. 5e	Push-pull RJ45
	Push-pull power
according to IEC 61076-3-117, variant 14, screened, Profinet I/O cable, at least cat. 5e	Push-pull RJ45
Installation orientation	Door hinge DIN left
Switching frequency	0.25 Hz
Mechanical life
	1 x 10⁶
in case of use as door stop, and 1 Joule impact energy	0.1 x 10⁶
Response time
Enabling switch	max. 250 ms Turn-off time
Bolt position	max. 550 ms Turn-off time
Guard locking	max. 550 ms Turn-off time
Emergency stop / machine stop	max. 250 ms Turn-off time
Door position	max. 550 ms Turn-off time
Shock and vibration resistance	Acc. to EN IEC 60947-5-3
Degree of protection	IP54
Ambient temperature
with U_B = 24 V DC	-20 ... +55 °C
Material
Housing	Fiber glass reinforced plastic, nickel-plated die-cast zinc, stainless steel
Locking force F_Zh	2000 N
Guard locking principle	Open-circuit current principle

Device	Module
Type	Evaluation \| Bus