Phoenix 1085176 Unmanaged Ethernet / Profinet Switch 5 x RJ45 Copper Ports plus 2 SFP Ports 10/100mb/s
Unmanaged Ethernet / Profinet Switch
Overview
Unmanaged Switch 1000 series, 5 RJ45 ports 10/100 Mbps, 2 SFP ports 100 Mbps, degree of protection: IP30, Ambient temperature (operation): -10 °C ... 60 °C, Supply voltage range: 9 V DC ... 32 V DC, PROFINET Conformance Class A
Specifications
Width
50 mm
Height
120 mm
Depth
70 mm
Housing material
Aluminum
Mounting type
DIN rail mounting
Ethernet (RJ45)
Connection method
RJ45
Note on the connection method
Auto negotiation and autocrossing
Transmission speed
10/100 Mbps
Transmission physics
Ethernet in RJ45 twisted pair
Transmission length
100 m (per segment)
Signal LEDs
Data receive, link status
No. of channels
6 (RJ45 ports)
Fiber optic interface
Connection method
SC
Transmission speed
100 Mbps (full duplex)
Transmission physics
multi-mode fiberglass
Transmission length
2000 m (Fiberglass 50/125)
2000 m (Fiberglass 62.5/125)
Wavelength
1300 nm
No. of channels
2 (SC multi-mode)
Product type
Switch
Product family
Unmanaged Switch SFN
Type
Block design
MTTF
61.9 Years (MIL-HDBK-217F standard, temperature 25°C, operating cycle 100%)
Insulation characteristics
Protection class
III (IEC 61140, EN 61140, VDE 0140-1)
Switch functions
Basic functions
Unmanaged switch / autonegotiation, complies with IEEE 802.3, store and forward switching mode, no flow control
Status and diagnostic indicators
LEDs: US, link and activity per port
Additional functions
Autonegotiation
Security functions
Basic functions
Unmanaged switch / autonegotiation, complies with IEEE 802.3, store and forward switching mode, no flow control
Local diagnostics
US1/2 Supply voltage Green LED
LNK/ACT Link status/data transmission Green LED
100 Data transmission speed Yellow LED
Maximum power dissipation for nominal condition
5.54 W
Test section
500 V DC 1 min
Transmission medium
Copper
FO
Supply
Supply voltage (DC)
24 V DC
Supply voltage range
18.5 V DC ... 30.2 V DC
Power supply connection
Via COMBICON, max. conductor cross-section 2.5 mm²
Residual ripple
3.6 VPP (within the permitted voltage range)
Typical current consumption
230 mA (at US = 24 V DC)
Additional Information
Device
Switch
Choosing a selection results in a full page refresh.
